colorcoding

Pre-treatment

The surface onto which CUGLACRETE must be applied needs to be clean. The cement skin coating should be removed and no free water may be present.

Pre-treatment with water

The surface must only be moistened with water (please: no free water!).

Or:

Pre-treatment with CUGLACRETE Hechtprimer cementgebonden or CUGLACRETE Hechtprimer Epoxy Sealer or CUGLACRETE Hechtprimer polymeer.

For an optimum bond we advise the use of CUGLACRETE Hechtprimer Cementgebonden, a cementitious polymer modified system, or CUGLACRETE Hechtprimer Epoxy Sealer, a system based on epoxy, or CUGLACRETE Hechtprimer Polymeer a fine polymer dispersion in water based on a acrylic resin.

Mixing

Mechanically mix CUGLACRETE until a homogeneous mixture is formed. Mixing time depends on the type of mixer, mix at least 3 minutes.

Water dosage

Water bandwith: see front of bag. Within the specified water bandwith, dose such a large amount of water that a workability corresponding to the mortar type achieved, withou beelding.

Handling information

Processing time 15 minutes, at 20 °C
Environmental temperature minimum 0 °C, maximum 30 °C
Surface temperature > 5 °C

Follow-up treatment

The finished surface should be carefully protect from dehydration with Cugla Curing Compoun, or covered with plastic film.

Storage

Dry storage

Icon legend